Видео

NAPTHA actually has one of the slowest evaporation rates. Part of what makes it most handy for removing old adhesives. More time to soak in and penetrate before drying out. Also why commonly used as lighter fluid. Generally safe on painted surfaces.

How much is the adjustment gap on the spark plug ? Can you please let me know what kind of adjustments you did to the carburetor. We just bought the CNG regulator and the generator doesn't stay running at all . Sounds like is starving for fuel. We have a 13000EH model.

“Man, those are some of the strongest shoe laces I’ve ever seen” 😂😂😂😂🎉🎉🎉🎉 Nice job dude, I’m gonna do a video on my table build here soon. Going through a bit of a divorce tho 😂 🤷🏻

Great video! I'm looking to put something like this in for a temporary living situation in a very rural area. How long does a system like this last before it fills up? How do you empty it once it is filled?

Where you gone mate ?

Oh heck yea, to have a handywoman you can call on to help is great. Especially one that is as strong as you are. Loved the way she exited by flinging her gloves to the floor.

Graet job, keep them videos coming. I have a lot of tips. THANK YOU Mike from Southern California

I’ve had Miller welders for years 250 bobcat no, I have

The large louvered make-up air exhaust vent completely nullifies any sound deadening advantage that the rigid insulation provides.

Thanks for the video.

Fantastic vids, man! You are a great teacher. Giving me the courage to move beyond the rattle can!

As a trained painter, well… never mind. But if I could pick just one thing, it would be spray gun stroke. Maybe forced by the wind but in any event, what?

Prefect

Lots of great tips thank you for sharing

Your the holiday goat

I would like a list of what you all used please im gonna use this on my tiny house (shed)

Home Depot will not put any oil based paints on their shaker.

Dude your pretty tough. Great channel.

Great job young man.

You are a very valuable young man

Now I think I'm going to be alright

Dude you are a paint mastermind. You saved the day.

Looks like its been painted with a catapult great effort 👍👍👍😀🥴

Did u pull the choke on the second attempt when turning it on ?

The engine will need some work. Also, the rig can convert the pushbutton engine start to a full key start ignition switch.

Question. If using 45s should a couple holes be drilled to break the vapor lock? Or is that only for 90s?

As a builder of more engines than I can remember you working hard not smart

Very good stuff. I would, though, try to screw tank connection and not just rely on a glue. What kind of use it goes through, how much you have to take out?

Election sign looks perfect to go into dirt, I like ;>

wow just a bad power cord!!

I'm doing a project like this but my end result will be ford blue, can anyone here recommend if I should go straight to blue after this or should I gray or white primer first to keep the blue the right color?

If you suggest the Japan drier for rolling, would the porportions be the same of different? Thanks, John

Can the Japan Drier be used if you're planning on rolling or is it really design for spray guns? I'm thinking of using Rustoleum Topside on a boat (above rub rails) and plan to roll. Too tight to spray. Thanks, John

Messy job.

Just stumbled on your video. Thanks for the ideas. The storage shelfs for your gray bins, is that 3/4” plywood? Does the plywood sag in the middle over time? How wide are the side support for your gray bin storage? Thanks again for the video and ideas!

the font you used makes me feel like I'm trying to solve a captcha

When pouring your paint can use a wide piece of tape half way around the can and half way up. Makes it easier to pour and less mess. Also tap a small hole in the outer rim of the can and the material will flow back into the can.

Sorry to be that guy, but one pint to one gallon is 8 to 1, not 4 to 1. Otherwise a great video

You are a great Master Painter.

Fantastic video! I have the same generator, and I would like to put it in a shed like this one. Do you know which shed this is? Looks large enough for the job.

I freaking love this so much. Bro... i envy you

That truck is moving gosh

How is that reinforced you are just welding it to the existing bracket welded to the frame confused on this one

why didn't you spray the dirt with some water to prevent dust? Doesn't your paint job now have a million grits all over it? I can a bunch in the video. I didn't know that those hardeners are toxic like the Navy dude said.

What insulation board did you use?

completely wrong, next idiocy would be elctrolysis, which doesn,t even worl on oily blocks,,,all steel parts got rusty and burried in their seats and threads, now a brass brush on aluminium! 🤯🤯🤯never any copper brass or bronze on aluminium ever! it,s all idiotic, ...buy a liter of kerosene, put an old window cleaner spray head on ghe bottle ( or fill it into the right one, for those who complayn that the threads are different possibly) and just put the old block on cardborad, spray and soak it , let its it and brush the grime off with some toilet brush or sink brish( those really reach into most edges)...you can throw the soaked cardboard and paper towels or shop paper scraps from wiping into the trash for burning and never pollute your yard and ground water with the shit you rinse off that nightmare of pollution,,,,a clean sollution: a big trash bag, a pack of kitchen paper ( or whatever you prefer) some cheap latex or nitril gloves, a cheap discount dish cleaning brush and some wooden or plastic sticks fro scraping....takes 1 hour, the engine doens,t gi white, nothing starts to rust...tjis engine is mow a case for a compket nightmare of rusted bolts and bearings! idiotic!

Low hydrogen rod which 7018 is in the vertices position should be ran uphill not down. A few manufacturers do make some low high that can be ran down hand but uphill will penetrate better and be a lot stronger.

Id ran pipe up with a rain cap so noise goes straight up in the air

dont need leaf spring sir ?

Very helpful video, thank you. Subscribed. I've always used rattle cans, and have had good results, but I waste a lot of paint. So, bought the Harbor Freight spray gun and am working on moisture filters now. I have an old jukebox cabinet I'm painting flat black with Rustoleum, but the kicker here is that I need to sprinkle gold glitter over the paint job while the paint is wet, enough to make the glitter stick. Painting this outside, and will use mineral spirits to help the paint stay wet a little longer. Probably do it when it's 50-60 degrees out. After it's painted and glittered up, it'll get matte clear over it. Think I'd better practice the whole procedure on a piece of plywood first, to see how well this is going to work.